|
 |
| |
|
|
The life of skate is precise edge of blade.
This product, which produced the diamond abrasive
with resinoid combination method first time
in Korea. The previous products is had the problems
such as less precision of sharpener and slow
speed of
|
| reducing
the edge. However, our new product will be solved
these problems, even the surface polishing. |
|
▒ Characteristic
|
Abrasive
|
SD
|
|
Grain size
(Чm)
|
Coarse mesh
|
㎛50
|
Grinding
|
|
Medium-
fine mesh
|
㎛30
|
Rough Finishing
|
|
Fine mesh
|
㎛20
|
Semi Finishing
|
|
Extra fine mesh
|
㎛10
|
Extra Finishing
|
|
Size
|
Diameter
|
Thickness
|
Grinding
|
|
60㎜
|
20㎜
|
× = 1.0
|
Standard set
|
Sharpening stone guide
|
㎛50
~ ㎛10
|
6 pcs
|
|
Base bar
|
-
|
3 pcs
|
|
Setting screw
|
-
|
6 pcs
|
|
Dresser
|
2 Grain size
|
2 pcs
|
|
Case
|
-
|
1 pcs
|
|
How to use the skate, ski sharpening stone.
1.Put and tighten the both skate shoes on grinding desk.
2.Adjust distance of the both skate shoes, and use the
stone to shuttle.
3.Clean the surface with water which it used, and keep
it wet.
4.Always to flat the surface of abrasive stone, and
use the stone to rotate to not be repeated.
5.It will build the sharp edges of both side skates
after grinding, and use the dresser to remove the edge.
6.Scrub the chip pocket with dresser, and clean it with
water.
7.It will build the edges of ski and snowboard directly
|
|
|
